This will sweep the needles of the speedo and rev counter through their full range automatically when you start the engine.
[Select]
[17 - Instruments], [07 - Coding], [Long Coding Helper]
Click on BYTE 1 and you'll see the selectable option: "Gauge Test/Needle Sweep active"
Check this option
[Do It!]
Chirp the alarm siren briefly when the alarm activates (ie all doors are closed and the car is locked)
[Select]
[46 - Central Conv], [07 - Coding], [ Long Coding Helper]
Click on BYTE 1 and in BIT 2 you'll see the selectable option: "Anti-Theft-System: Horn Confirmation active"
Check this option
[Do It!]
Adding the option to turn off / turn on the DRLs via the MMI
[Select]
[09 - Central Elec], [07 - Coding], [ Long Coding Helper]
Click on BYTE 3 and enable BIT 0 (Daytime running lights adjustable via MMI)
[Do It!]
[Select]
[46- Central Convience], [10 - Coding],
Select channel 50
Adjust the value accordingly
+1 = Emergency Brake Blinking
+2 = Brake Light Surface Amplification
+3 = Emergency Brake Blinking and Brake Light Surface Amplification
[Do It!]
When reverse gear is selected, the passenger door mirror dips to show the kerb if the mirror control knob is set to the passenger door mirror position. When driving forwards and exceeding 5mph or when switching off the car, the passenger mirror returns to its original position. If the position of the mirror is changed when dipped, this change is remembered the next time the mirror dips.
[Select]
[52 - Door Elect, Pass], 07 - [Coding], [Long Coding Helper]
Click on BYTE 4 (5th one along from the left)
Set BIT 2 to "on"
[Do It!]
Turn off the annoying "Bing bong" when you move the car on the driveway without your seatbelt fastened.
[Select]
[17 - Instruments], [07 - Coding], [Long Coding Helper]
Click on BYTE 0 and in BIT 4 you'll see the selectable option: "Seat Belt Warning inactive"
Check this option
[Do It!]
In the high-beam assistant's control unit, you have the option of adjusting the dimming and superimposition speeds on the Audi A6. For example, if you want the high-beam control assistant to activate earlier, you can easily adjust/modify it as described.
[Select]
[20 - High Beam Assistant], [10 - Adaption]
[Select Channel Fade Speed]
(Speed at which the high beam can be displayed according to the environmental conditions)
Value For example, adjust to 30 - standard 57 km/h
[Select]
[20 - High Beam Assistant], [10 - Adaption]
[Select Channel Dimming Speed]
(Speed at which the main beam is dimmed and the high beam assistant is deactivated)
Value For example, adjust to 10 - default: 27 km/h
In the onboard supply control unit, you have the option of activating the motorway light on the Audi A6 4F. At high speed (from 110 km/h), the illumination of the xenon is then automatically adjusted - the light cone becomes narrower in width and thus longer.
[Select]
[09 - Cent Elec], [07 - Coding], [Long Coding Helper]
Select subsystem: 2 - xxx - RLS (rain and light sensor) BYTE 0
Enable BIT 0 - Motorway light - activate
[Do It!]
The Lap Timer options appears in the DIS menu when you press the button on the underside of the wiper control stalk.
[Select]
[17 - Instruments], [07 - Coding], [Long Coding Helper]
Click on BYTE 1 and you'll see the selectable option: "Lap Timer active" Check this option
[Do It!]
[Select]
[09 - Central Elec], [16 - Security Access], (enter security code - as displayed)
[10 - Adaptation]
[Select] Channel 03 and Read
Change the value from 5 to 100
Press TEST
[Do It!]
In the dash panel control unit / instrument cluster, you have the option of having the Audi A6 4F display the oil temperature in the DIS. The following coding is to be used:
[Select]
[17 - Control Panel], [07 - Coding], [Long Coding Helper]
Click on BYTE 1 and in BIT 3 you'll see the selectable option: "Display Oil Temp", Check this option
[Do It!]
[Select]
[09 - Central Elect]
[07 - Coding]
Change the last digit in the coding string to '2'
Example - 0xxxxx2
[Do It!]